Broadcast Tools SS 2.1/Terminal III Spezifikationen PDF herunterladen (Seite 25)

e-mail:

voice:

360.854.9559

fax:

866.783.1742

Site Sentinel

16 Installation and Operation Manual

SETUP

Power Failure

Label: Used to identify the monitoring source.

Alarms Enter: This option enables the email alarms if the voltage is no longer

present on this input.

Alarms Exit: This option enables the email alarms when the voltage returns.

Email Addresses: This allows you to configure up to 8 emails to be sent whenever

the input enters or exits an alarm.

Log Device: This enables the email logging of this device.

Delay Time: The delay is in (0 to 999) seconds. This option specifies the wait

time from when a value is out of range before an alarm is acti-

vated.

Alarm LED: User defined color of LED on the Monitor and

Control page when in an alarm condition.

NOTE: After any item has been changed, you MUST press the “Save Settings”

button for your changes to be saved.

Restoring Network Factory Defaults

NOTE: The Site Sentinel® 16 factory defaults may be restored by holding the

“Default” button IN, repowering the unit, wait for the SS and PF LED’s to

flash, then release the “Default” button.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Keine Kommentare

Broadcast Tools SS 2.1/Terminal III Spezifikationen Seite 25