Broadcast Tools DSC-20 Spezifikationen PDF herunterladen (Seite 9)

Broadcast Tools, Inc.

DSC-20, Dual Satellite Receiver Controller Set-up guide

Installation and Operation Manual

Broadcast Tools, Inc.

Page 9

INSTALLATION Continued

F If this test fails, try changing com ports on the communication program until you

find the correct port. When a working com port is found, repeat the above test

starting at step 1.

 Tool Tip: With some communication programs, any change made to the program

settings requires you to save the changes, exit the program and restart the

program.

 NOTE: If you find that a failure is traced to the receiver and ALL receiver

troubleshooting has failed contact the receiver manufacture.

Connecting the DSC-20 to your computers serial port

• Connect one end of the supplied modular cable to J5 (Computer) on the DSC-20

and the other end to the male D-Sub to modular adapter labeled “S-9”.

• Plug the female D-Sub modular “S-9” adapter into your computers serial port.

• Press the space bar ONCE and the configuration menu will appear.

The pin out of the modular/D-Sub adapters is shown below.

RJ-11

Adapter

Number.

DB-9 “V-9”

Male. Pin

Number.

StarGuide

II/III M & C

port

DB-9 “S-9”

Female. Pin

Number.

“Remote”

DSC-20 point

of view.

Function Name.

42 3RS-232 Receive

33 2RS-232 Transmit

25 5Ground

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Keine Kommentare

Broadcast Tools DSC-20 Spezifikationen Seite 9