ee--mmaaiill::
vvooiiccee::
360.854.9559
ffaaxx::
866.783.1742
10
ProMix 12 Installation and Operation Manual
OPERATION
cast consoles.
To use the CueMix feature (for example, to preview a track on a CD), follow these steps:
1. Put the CD player’s line input channel in CUE mode by pressing it’s CUE
button (7).
2. Turn the CueMix feature ON, by pushing the QMIX button (12) down. The
Monitor system will dim, reducing “normal” bus audio by 20dB; CUE bus
audio will be heard through the right monitor speaker. Adjust Cue audio
level using the CUE LEVEL control (24). Preview the source.
3. Once the CD is “ready for air”, release the QMIX button and the CUE button
for the CD player channel. The Monitor system will return to normal operation.
The Cue system can also used in a “conventional” manner with the addition of an
external (amplified) cue speaker, connected via the CUE/TB output jack. (See
Section 2.9.) The audio level at this jack is controlled by the CUE LEVEL control
(24). This Cue audio output mutes whenever the Monitor system is muted.
The cue bus can also be heard via the console operators PHONES output. (See
Section 4.5)
4.5 PHONES OUTPUT
The console operator can monitor the console’s Monitor output via the PHONES jack
(15). Headphones of 24 to 600 ohms can be used. Do not use older 8-ohm head-
phones. The MONI/CUE button (16) determines what is heard through the head-
phones. If this button is up, the headphones will “follow” whatever audio source is
selected for the Monitor system. If the button is down, the headphones will monitor
the Cue bus. The headphone volume is adjusted with the PHONES control (17).
4.6 BOOTH OUTPUT
The console provides a secondary headphone output for use by an announcer in an
“announce booth”. The MONI/AUD button (18) determines what the booth
announcer hears. If the button is up, the announcer will hear the same audio heard
by the console operator via the Monitor system. If the MONI/AUD button (18) is
down, the announcer will hear the Audition bus output. This allows the Audition bus
to be used to create a special “announcer mix”. The Booth headphone level is
adjusted with the BOOTH control (19).
Use headphones with an impedance of 24 ohms or higher. Do not use older 8-ohm
headphones.
4.7 TALKBACK SYSTEM
The console includes a full-duplex Talkback system that allows the console opera-
tor to converse with the booth announcer, off-air. (To use the system in duplex
(18 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern