Broadcast Tools WVRC-8 Spezifikationen PDF herunterladen (Seite 19)

e-mail:

voice:

360.854.9559

fax:

866.783.1742

WVRC-8 Installation and Operation Manual

PROGRAMMING

Example: To enter low and high alarm set points of 30F and 95F, enter 0030/0095.

To enter low and high alarm set points of 10C and 40C enter 1010/1040. Do not enter

the “/”, it will be entered automatically.

When “6” is selected from the PGM menu, the Status inputs are set up for either

Normally Open or Normally Closed and the required DEBounce time needed before

generating an alarm.

When 1 is selected from the menu: Make changes or press ESCape to accept current

values. If changes are made, all eight values must be entered in sequence.

When 2 is selected from the menu, the following is displayed:

Make changes or press ESC to accept current values. If changes are made, all eight

values must be entered must be entered in sequence. Valid settings are 0 through 9. A

“0” will turn off the status input so that it will not generate an alarm. Entering any

number from 1–> 9 will set the “DEBounce” period from 10 to 90 seconds, requiring

the input to be in an alarm state for that amount of time before an alarm is generated.

Any interruption will cause the timer to reset.

WEBSITE:

Visit our web site for

product updates and

additional information.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 40 41

Keine Kommentare

Broadcast Tools WVRC-8 Spezifikationen Seite 19